Chapter 5 Maintenance and Troubleshooting
4. If the power supply on the right is being replaced, use a Phillips-head screwdriver to
remove the bracket attached to the inside of the chassis on the right side, as shown in
Figure
5–8.
Figure 5–8: Removing the Power Supply
5. Grasp the metal handle on the front of the power supply unit and pull firmly to disengage
the power supply from the connector, as shown in
6. Slide the power supply away from the unit.
© 2015 Harmonic Inc. All rights reserved.
5
4
6
Figure
5–8.
44
Power Supply
(RN-14)
Electra 9200, Rev O