Appendix A: Sample Network With Pbx/Mg-Sip Programming; Sample Network; Pbx Programming For Mg-Sip In Sample Network - NEC MG-SIP Configuration Manual

APPENDIX A: Sample Network with PBX/MG-SIP Programming

A-1 Sample Network
A-2 PBX Programming for MG-SIP in Sample Network
(This does not include normal LCR programming CMDs ANPD, ASPA, ARNP, ARRC, ARSC, AFRS, AOPR, AMND,
etc.) [If to be shared in Fusion Network use "N" commands, ie ARTDN, where necessary.]
ASYD
SysData1 Index64 = "80h", Bit7 = 1 (holding tone sending)
SysData1 Index186 = "71h", Bit6 = 1 (ISDN)
SysData1 Index187 = "00h"
SysData1 Index220 = "05h", Bit6=0 (ISDN is enabled)
ASYDL
System Data 1 Index 810 = "03h", Bit2 = 0/1 [Int. Hold Tone /Ext. Hold Tone]
System Data 1 Index 880 = "1Fh", Bit1 = 1 (Internal PHI is enabled)
ADTM – Internal PH-I PRI/BRI left at default value = 64000.
MG-SIP Page 68 of 75 5/8/2009