Set Commands; Setδ183Rbt; Setδanother_Keynumber; Setδauth - NEC MG-SIP Configuration Manual

7.5.3 SET COMMANDS

7.5.3.1 SETΔ183RBT
This command is used to enable/disable the connection of local RBT when 183 message without SDP is received.
Pressing the Enter key can skip the item. In this case, default values are assigned automatically. To make this
assignment effective, it is required to execute the "REBOOT" command to restart the MGSIP16.
Assign this command adjusting to the specifications on SIP network. Normally this command is not required to be
changed.
7.5.3.2 SETΔANOTHER_KEYNUMBER
The command is used to assign three pilot numbers (in addition to the pilot number assigned by the "KEYNUMBER"
command) for registration to SIP server. Pressing the Enter key can skip this item. In this case, default values are
assigned automatically. To make this assignment effective, it is required to execute "REBOOT" command to restart
the MG-SIP16.
Note: Assign this command adjusting to the specifications on SIP network. Normally this command is not
required to be changed. Unique number to be assigned for each of Another keynumber 1/2/3. Assign
value=0 (default) for parameter when nothing is to be assigned.
7.5.3.3 SETΔAUTH
The command is used to specify a User ID and a password for HTTP Digest Auth. This parameter is used when the
SIP server performs authentication. Pressing the Enter key can skip the item. In this case, default values are assigned
automatically. To make this assignment effective, it is required to execute the "REBOOT" command to restart the
MG-SIP16.
7.5.3.4 SETΔAUTH_HEADER
The command is used to assign whether to add cache information to authentication header of request message in
updating ACK and REGISTER for re-INVITE/200 OK. Pressing the Enter key can skip the item. In this case,
default values are assigned automatically. To make this assignment effective, it is required to execute the "REBOOT"
command to restart the MG-SIP16.
MG-SIP Page 28 of 75 5/8/2009