Setδrtp_Pathon; Setδrtp_Qos; Setδself_Sip_Domain - NEC MG-SIP Configuration Manual

Note: Assign this command adjusting to the specification on SIP network.
When registration per number function is effective, assign by setting MG(SIP) using the largest number within the
same MG(SIP) group referring to table below.
7.5.3.31 SETΔRTP_PATHON
This command is used to assign Path-on function by 183Progress after receiving 180Ringing. Pressing the Enter key
can skip the item. In this case, default values are assigned automatically. To make this assignment effective, it is
required to execute the "REBOOT" command to restart the MG-SIP16.
Note: Assign this command adjusting to the specifications on the SIP network.
7.5.3.32 SETΔRTP_QOS
This command is used to specify the QoS of Real-Time Protocol (RTP). Pressing the Enter key can skip the item. In
this case, default values are assigned automatically. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16. The sample data setting is explained in SET DRS_QOS command.
7.5.3.33 SETΔSELF_SIP_DOMAIN
This command is used to create SIP domain. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
•
When SIP Domain Mode is Disable (=0) is selected:
MG-SIP Page 45 of 75 5/8/2009