- Specify the accommodated location of Virtual Control Channel on Point Code as follows:
6.12 ACIC1
PC: Enter Point Code specified by ADPC
CSCG: Enter CSC group specified by ACSC
- Specify the accommodated location of Virtual Control Channel on Point Code as follows:
6.13 ACIC2
PC: Enter Point Code specified by ADPC
CIC: Enter CSC numbers in sequential number
LENS: Enter accommodated locations of Speech Channel and B-Channel
- Cancel Make Busy of Virtual Speech Channel.
6.14 MBTK
RT: Enter Route Number
TK: Enter Trunk Number
MB = 0 (Make-Busy is cancelled.)
- Specify information regarding to MG-SIP16 as follows:
6.15 AMGIL
MG-ID: Enter MAC Address (6 bytes)
FUNCTION = Setting
KIND = SIP-MG
LINE = 0 (fixed)
CH = 0 (fixed)
LENS: Enter Basic Accommodated Location (the first number of HW)
Retry = 0
Service Type: Specify QoS settings of Signaling that is used when PHI connects MG-SIP16.
CH: Enter the number of channels to be used per MG-SIP16 [1-16].
Service of Authentication exists: Select the box if a registration is required per number. Note
Whether to use Service of Authentication is determined by the carrier's selected services.
Note:
For more information about this feature, refer to Multiple Number Service (MG-SIP) [M-113].
MG-SIP
Page 15 of 75
5/8/2009