Table of Contents
Advertisement
When the total number of channels using PHI exceeds 256, increase the value of
Note:
REGMAX.
– Specify the route class data on Virtual Speech Channel as follows. It is not necessary to
6.7 ARTD
register attributes for the Virtual Signaling Channel.
CDN2 (ONSG) = 2 (PB, 60 milliseconds Interruption, CCIS, or ISDN)
CDN4 (INSG) = 2 (PB, 60 milliseconds Interruption, or CCIS)
CDN5 (TF) = 3 [Bothway Trunk (BWT)]
CDN6 (TCL) = 1 (DDD Line/Tie Line)
CDN7 (L/T) = 1 (Trunk)
CDN8 (RLP) = 2 [First Party Release (either station or trunk side)]
CDN15 (LSG) = 12 [Speech Line (for CCIS or B-Channel of ISDN)]
CDN28 (ANS) = 1 (Answer signal is provided)
CDN30 (PAD) = 7 [PAD OFF(0db)]
CDN31 (OGRL) = 1 (224 milliseconds)
CDN32 (ICRL) = 1 (224 milliseconds)
CDN34 (GUARD) = 1 (512 milliseconds)
CDN45 (A/D) = 0 (Analog)
CDN49 (TRKS) = 0 (Select from the trunk which becomes idle first)
CDN50 (DPLY) = 1 (Number Display of Dterm between offices is given)
CDN60 (TC/EC) = 1 (Echo Canceller)
CDN65 (INT) = 10 [Q-Sig, (ETS 300 172)/IS-11572]
CDN66 (DOC) = 1-15 (DID Addressing number)
Assign the CDN111 (ADVPRA) = 1 (ISDN PRI Failure Routing Service) to Dummy Routes.
- Specify the application data for trunk.
6.8 ARTI
CDN47: INTD = 2 (H.323/SIP)
CDN68: VIR = 2 (MG connection)
CDN77: RA_RT = 0/1 (Virtual Register is used/Register card is used)
6.9 ATRK - Specify trunk data on Virtual Speech Channel and Virtual Signaling Channel.
RT: Specify Route Number [1-255]
TK: Specify Trunk Number [1-255]
LENS: Specify Accommodated Location (Six digits)
The following is an example of 16-channel operation.
MG-SIP
Page 13 of 75
5/8/2009
Hide quick links:
Advertisement
Table of Contents
