Setδsession_Timer - NEC MG-SIP Configuration Manual

•
When SIP Domain Mode is Enable (=1) is selected:
Note 1: Assign this command adjusting to the specifications on the SIP network.
Note 2: This command is required only when SIP domain must be separated between the SIP server and
MG(SIP)16.
Note 3: When no data has been assigned by this command, SIP domain that has been set by "setΔsip_server"
command will be used as the SIP domain of MG(SIP)16.
7.5.3.34 SETΔSESSION_TIMER
This command is used to specify the Session Timer. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
•
When Session-Timer is Enable (=0) is selected:
MG-SIP Page 46 of 75 5/8/2009