15.This UPS supports electronic equipment in offices, telecommunications, process
control, medical and security applications. Non-authorized technician is not
allowed to install the UPS in the following areas:
a. Medical equipment directly related to human life
b. Elevator, Metro (Subway) system or any other equipment related to human
safety.
c. Public system or critical computer systems.
16.Do not install the UPS in an environment with sparks, smoke or gas.
17.Make sure the UPS is completely turned off when moving the UPS from one
place to another. It might cause electrical shock if the output is not cut completely.
2.2
Storage Instruction
For extended storage through moderate climate, the batteries should be charged for
12 hours every 3 months by plugging the UPS power cord into the wall receptacle and
turn on input breaker on front panel. Repeat this procedure every 2 months under high
temperature environment.
4
3 SET UP
3.1
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The package is recyclable; save it for reuse or dispose of it properly.
3.2
Place the UPS Properly
The UPS is with microprocessor control, which shall be placed in a well-ventilated &
low humid environment.
5