Main Components - Cembre RDS-14P Operation And Maintenance Manual

Descriptions and possible confi gurations:
RDS-14P
RDS-14P.78 *
AA-RDS
SA-RDS
RDS-14P-AA
RDS-14P.78-AA *
RDS-14P-SA
RDS-14P.78-SA *
(*) Rail saw suitable for cutting discs with hub diameter of 22.2 mm (7/8").

Main components

1 – Air fi lter spark plug cover
2 – Upper handle
3 – Safety guard (spark guard)
4 – Abrasive cutting disc (to be mounted)
5 – Transmission system side guard
6 – Foot
7 – Power Take Off for active arm
8 – Support arm pin slot
9 – Silencer / muffl er
10 – (EasyStart) Decompression valve
11 – Combustion engine
12 – Abrasive cutting disc fi xing
13 – Slot for support arm reference pin
•
•
•
(Ref. Fig. 1 page 5):
•
•
14 – 4mm Allen key for removing side guard
15 – Auxiliary switching device
16 – Multifunction spanner (torx + cut)
17 – Fuel tank cap
18 – Main ON/OFF switch
19 – Rear control handle
20 – Accelerator
21 – Safety lever
22 – Accelerator block
23 – Air valve control (starter)
24 – Starter rope grip
25 – Auxiliary switching device antenna
26 – Measure for petrol-oil mix
27 – Lanyard for auxiliary switching device
•
•
4