Table of Contents
Advertisement
The AA-RDS automatic support arm allows the machine to cut rail without operator contact as
h
S
it picks up the motion from the rail saw and automatically simulates the movement of the ope-
rator during cutting; the rail saw is guided to obtain a perfectly perpendicular and straight cut.
Furthermore,this arm safely supports the rail saw in a comfortable position to facilitate fi xing
and starting of the engine.
Description:
1. Transport handle
2. Sliding tracks
3. Suspension for cut loading
4. Disc movement adjustment ring
5. Cutting reference plate
6. Mobile jaw
7. Locking/unlocking handwheel
8. Motion transmission gear
9. Rail saw locking pin
- Weight: 19.8 kg (43.5 lbs)
- Dimensions (mm):
ll
491
170
586
h
h
10. Reference pin
11. Interface rotation lever
12. Mobile arm
13. Rail saw locking handle
14. Stabilising rods
15. Fixed arm
16. Fixed jaw
17. Overturning red lever/use in manual mode
18. Arm stationary positioning blue lever
NOTE: if necessary, it is possible to use the rail
saw in manual mode with the AA-RDS sup-
port arm by the red lever (17) (Ref. to § 8.4).
l
h
354
14
Advertisement
Table of Contents
