Table of Contents
Advertisement
If the rail saw stops at the rail head shortly after starting the cut, it means that the cutting force is
too high: rotate the adjustment ring a couple of turns towards higher values in order to put more
load on the contrast spring. If the rail saw stops at the intersection between the rail web/foot
towards the end of the cut, it means that the cutting force is insuffi cient: rotate the adjustment
ring towards lower values in order to unload the suspension. (Ref. to § 6.2).
The SA-RDS manual support arm safely supports the rail saw in a comfortable position, which
facilitates fi xing and the starting of the engine.
The rail saw needs to be guided during manual mode to obtain a perfectly straight and per-
pendicular cut. Moreover, the operator can work unhindered on both sides of the rail to take
up the cut easily and precisely.
- Weight: 8.5 kg (18.7 lbs)
- Dimensions (mm):
254
170
640
23
Advertisement
Table of Contents
