The fi gure shows the correct positioning of the rail saw on the support arm on both sides of the rail.
8.4) Mounting/dismounting the rail saw on the manual support arm
Before mounting the rail saw on the support arm, make sure that clamp (6) is fi rmly
locked as described in § 6.1, lever (7) is completely inserted and knobs (8) are aligned.
1- Mount the rail saw on the support arm,
match the interface pin (11) with the slot of
the rail saw.
2- Push and rotate handle (1) tightening it fully.
To dismount the rail saw, completely loosen handle
(1) and remove it.
11
1
2
1
26
7
8
6