Cembre RDS-14P Operation And Maintenance Manual page 16

6.1) Attaching the arm to the rail
Open mobile jaw (6) by turning handwheel (7).
Support the arm by handle (1) and rest the clamp on top of the rail head so that all four support
teeth (Ref. Fig. a) touch the rail. Tighten the clamp fi rmly with handwheel (Ref. Fig. b).
Before mounting the rail saw on the arm,
check that the clamp is positioned and locked
in a correct manner on the rail head (Ref. Fig. b).
If the arm is wrongly positioned, it can cause cut-
ting which is not perfectly straight (Ref. Fig. c, d).
clamp
Fig. a
NOTE: The fi xing clamp is designed to allow a precise and secure tightening of the arm on Vignole
type rails; for the fi xing of the arm on diff erent rail types contact Cembre.
Type Vignole
1
6
7
4 support
teeth
Contact Cembre
Fig. b
OK
Fig. c
NO
Fig. d
NO
16