Toshiba VF-S15 Instruction Manual page 42

Industrial inverter for 3-phase induction motors
Hide thumbs Also See for VF-S15:
Table of Contents

Advertisement

 How to install
 Do not install or operate the inverter if it is damaged or any component is missing.
Prohibited
1
 Mount the inverter on a metal plate.
 Do not operate with the terminal block cover removed.
 An emergency stop device must be installed that fits with system specifications (e.g. shut off input
Mandatory
action
 All options used must be those specified by Toshiba.
 The main unit must be installed on a base that can bear the unit's weight.
 If braking is necessary (to hold motor shaft), install a mechanical brake.
Mandatory
action
(1)
Select an indoor location with good ventilation, and then install it upright on a flat metal plate.
When installing multiple inverters, leave at least 3 cm of space between each inverter and install them
aligned horizontally.
When using the inverter in locations with temperatures above 40°C, remove the protective label on the top of
the inverter and use the inverter with the output current reduced according to section 6.18.
(2)
To align the inverters side-by-side horizontally, remove the protective label on the top of the inverter before
use. When using the inverter in locations with temperatures above 40°C, use the inverter with the output
current reduced.
If the door is opened 90° or more, please open the door with the left side inverter's door open when the same
capacity inverters are installed with side-by-side.
3 cm or more
This can result in electric shock or fire. Call your Toshiba distributor for repairs.
The rear panel gets very hot. Do not install in an inflammable object, this can result in fire.
This can result in electric shock.
power then engage mechanical brake).
Operation cannot be stopped immediately by the inverter alone, thus, resulting in an accident or injury.
The use of any other option may result in an accident.
If the unit is installed on a base that cannot withstand that weight, the unit may fall, resulting in injury.
The brake on the inverter will not function as a mechanical hold, and if used for that purpose, injury
may result.
Normal installation
Side-by-side installation
5 cm or more
Inverter
3 cm or more
5 cm or more
Normal installation
Warning
Caution
5 cm or more
Inverter
Inverter
Inverter
5 cm or more
Side-by-side installation
A-30
E6581611
Remove seals on top

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents