Toshiba VF-S15 Instruction Manual page 25

1.3.3 Power circuit and control circuit terminal blocks
1) Power circuit terminal
In case of the lug connector, cover the lug connector with insulated tube, or use the insulated lug
connector.
Use a plus or minus screwdriver to loose or tighten screws.
Screw size
M3.5 screw
M4 screw
M5 screw
M6 screw
M4 screw (grounding terminal)
M5 screw (grounding terminal)
Refer to section 2.3.1 for details about terminal functions.
VFS15-2004PM-W to 2007PM-W
Shorting-bar
Grounding terminal
(M4 screw)
Note1) Bend the clips on the wiring port of the terminal cover to connect the PB, PO, PA/+, and PC/- terminals.
Note2) Be careful to insert all wires into the cage of terminal block.
Tightening torque
1.0 Nm
1.4 Nm
2.4 Nm
4.5 Nm
1.4 Nm
2.8 Nm
M3.5 screw
Grounding terminal
(M5 screw)
For EMC plate
A-13
8.9 lbin
12.4 lbin
20.8 lbin
40.0 lbin
12.4 lbin
24.8 lbin
Grounding terminal
(M4 screw)
E6581611
1