Maintenance - Nautilus U624 Service Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to
do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
!
maintenance is done. Worn, damaged or loose components must be repaired or replaced immediately. Only
manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact from your local distributor for
WA R N I N G
replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the
D A N G E R
power cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this
machine. Place the power cord in a secure location.
AT T E N T I O N
!
When disposing of old parts, obey the applicable local and provincial requirements.
Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts.
IMMEDIATE ACTION REQUIRED
Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage.
C A U T I O N
After each workout, use a damp cloth to wipe your machine and Console free of moisture.
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for smooth seat
Weekly:
slider operation. If needed, apply a very thin coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Monthly Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are tight.
or after 20 hours: Tighten as necessary.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free
of moisture.
4