Power Inlet - Nautilus U624 Service Manual

Loosen and remove the thin Nut from the Power Inlet (C) on the
3.
outside of the Shroud.
Pull the Power Inlet plug (C) out of the hole toward the inside of the
4.
Shroud. Discard the old Power Inlet assembly.
Installation is the reverse procedure.
5.
NOTICE: Do not crimp any cables. Be sure the Power Inlet plug is
seated evenly in the hole.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
C
C
A
62
A
C