Maintenance - Nautilus Bowflex C7 Service Manual

MAINTENANCE

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact
your local distributor for them.
Daily:
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not
sure adjustment knobs are tight. Tighten as necessary. Check the Pedals and tighten as necessary.
After each workout, use a damp cloth to wipe your machine and Console free of moisture.
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not clean
Weekly: Clean the machine to remove any dust, dirt, or grime from the surfaces.
Tighten as necessary.
Check for smooth seat operation.
Monthly
Check the drive belt tension and adjust if necessary.
or after 20 hours:
To check the Drive Belt tension, the bike needs to be operated. Get the pedals rotating
pedals move normally with no slipping, the tension is correct. If the Pedals slip, the belt
needs to be adjusted.
1. To change the tension of the Drive Belt, loosen the Axle Nuts. Use a 19mm open
end wrench to hold the Axle Nut on one side steady, and loosen the Axle Nut on
the opposite side with a 19mm socket and wrench.
2. If the Drive Belt is too loose and slipping, use a 10mm wrench to turn each Fly-
wheel Retainer Nut a 1/4 turn to the right (clockwise).
3. Re-test the tension of the Drive Belt, and adjust if still necessary.
with a petroleum based solvent, automotive cleaner, or any product that contains ammo-
nia. Do not clean the Console in direct sunlight or at high temperatures. Be sure to keep
the Console free of moisture.
Do not use petroleum based products.
5