Power Inlet - Nautilus U624 Service Manual

NOTICE: It is necessary to remove the Shrouds for this procedure. Refer to the "Replace the Shrouds" procedure.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and wait 5
minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location.
Note: Your machine may not match the image. For reference only.
Carefully remove the Left Shroud. Refer to the "Replace the Shrouds"
1.
procedure in this manual.
Carefully disconnect the Power Inlet cable (A) in the Shroud from the
2.
wiring harness (B) on the motor.
Upright bike
A
Recumbent bike
B
61
B
A