Maintenance; Leveling The Machine - Nautilus R618 Service Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
regular maintenance is done. Worn or damaged components must be repaired or replaced immediately.
Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased
in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact
your local distributor for them.
Daily:
After each workout, use a damp cloth to wipe your machine and Console free of moisture.
Note:
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not clean
Weekly:
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for smooth seat
slider operation. If needed, apply a very thin coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Monthly Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are tight.
or after 20 hours: Tighten as necessary.

Leveling the Machine

Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the stabilizer
foot to adjust.
Do not adjust the levelers to such a
the machine. Injury to you or damage to
the machine can occur.
To adjust the leveler on the Frame Rail:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the
leveler.
Make sure the bike is level and stable before
with a petroleum based solvent, automotive cleaner, or any product that contains ammonia.
Do not clean the Console in direct sunlight or at high temperatures. Be sure to keep the
Console free of moisture.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.
5