Device Operation - Honeywell hus-nvr-1032-e User Manual

System Operation and Configuration

Device Operation

30
Figure 5-5 Editing Mode
Refer to step 1 and 2 of "Creating a
When editing is done, click
window is displayed as shown in the following figure:
Figure 5-6 Editing a View
Click OK to save the change; or click Save As to create a new view with the old one
remained.
Removing a View
Select a view in the "Views" list and click
window is displayed, click OK.
The "Devices" list is on the right side of the Live screen and displays the IP cameras
connected to this NVR. In the "Devices" list, you can add, edit, configure and remove the
camera or play the live video, record manually and play history video.
Device name in blue—online;
Device name in red—an alarm is occurring and the icon
View" on page to edit. To give up editing, click
29
in the bottom right corner of the window and a pop-up
in the bottom right corner and when the pop-up
is displayed;
.