Usb Connection; E-Sata - Honeywell hus-nvr-1032-e User Manual

USB Connection

There are two USB ports (5V 500mA) on the front panel and one on the rear panel for
connecting USB devices. To ensure the NVR runs properly, do not connect USB devices
which consume a lot of power.

e-SATA

e-SATA port is used for connecting SATA disk or specified disk arrays (contact the technical
support for the model number of HDD array).
Make sure that the initialization of disk (RAID ARRAY) has been completed
successfully before use. Refer to the manual of the disk (RAID ARRAY).
Honeywell
13