User Settings - Honeywell hus-nvr-1032-e User Manual

System Operation and Configuration

User Settings

66
Basic
Click "Basic" to view and modify User Interface language, resolution and Local On-screen
Display as shown in the following figure:
Figure 5-76 Display
Image
Click "Image" and select HDMI/VGA or CVBS to modify image parameters as shown in the
following figure:
Figure 5-77 Image Parameters
Patrol
See "Patrol" section on page 42.
Click User Settings in
Figure 5-65
options: "User Management" and "Role Authority" as shown in the following figure:
Figure 5-78 User Settings
User Management
Click "User Management" to view the basic information of current selected user, reset
password, etc., as shown in the following figure:
to enter the User Settings screen and where there are 2