Honeywell hus-nvr-1032-e User Manual page 40

System Operation and Configuration
34
3. Click Import devices list and the "Import File" window is displayed as shown in the
following figure:
Figure 5-12 Import File
Select USB device and target file (CVS file) and click OK to enter the "Choose
4.
Cameras" window as shown in the following figure:
Figure 5-13 Choose Cameras
5. Check the target camera and click
Click Add, when the pop-up window is displayed, click OK to add target cameras to the
6.
"Devices" list.
to turn page down.