Figure 5-10 Search Camera
2.
Click Search and then all the cameras of this type are listed. Click
down.
Check the target camera checkbox. Click Quick Add, when the pop-up window is
3.
displayed, click OK to add the selected cameras to the "Devices" list; or click Next to
manually edit the parameters, see
Import
1.
Connect a USB storage device with the file (.cvs) on it to the NVR.
2.
Click "Import" tab on "Add Devices" screen as shown in the following figure:
Figure 5-11 Import Devices List
Figure
5-8.
Honeywell
to turn page
33