Table of Contents
Advertisement
Notices for Use
Working Principle and Special Functions for Cooling
Principle:
Air conditioner absorbs heat from room and then transmit it outdoors for discharge of it,
so that indoor ambient temperature will be decreased.By this principle,its cooling capacity
will decrease with the increase of outdoor temperature.
Anti-freezing Function:
If the unit is running under cooling mode at low temperature, the surface of indoor heat
exchanger will frost.When the temperature of indoor heat exchanger decreases to -2
below ,the indoor microcomputer will make the compressor stop to protect the unit.
Working Principle and Special Functions for Heating
Principle:
Air conditioner absorbs heat from outdoors and transmit into the room for distribution,
so that indoor temperature will be increased.
Note:By this principle,heating capacity of the unit will decrease with the decrease of outdoor
temperature.
If outdoor temperature gets much lower, please operate with other heating equipments.
Defrosting:
When outdoor temperature is low with high humidity, the outdoor heat exchanger will
frost after the unit runs for a period of time, which affects heating. At this time, auto
defrosting function will act and heat running will briefly stop for 5-10min.
During auto defrosting, both indoor and outdoor fans stop running.
During defrosting, the outdoor unit may emit vapor,which is due to rapid defrosting,not
malfunction.
The unit will resume heating after defrosting.
Anti-cold Air Function:
Under heating mode, if indoor heat exchanger hasn't reached certain temperature under
the following three kinds of states, the indoor fan won't start to avoid blow of cold air (within
90s).
1. At the beginning of heating
2.After auto defrosting
4
3.Heat at ultra-low temperature
or
℃
Advertisement
Table of Contents
Need help?
Do you have a question about the MUCO-H6T and is the answer not in the manual?
Questions and answers