Changing Batteries And Notices - mundoclima MUCO-H6T Owners And Installation Manual

Operation of remote control
1.Slightly to press the place with
direction to push the back cover of remote controller.
(As show in Fig 1. )
2.Take out the old batteries, insert two AAA alkaline
cells. (As show in Fig 2.)
3.Attach the back cover of remote control.
NOTE:
When changing the batteries, do not use the old or
●
different batteries, otherwise, it can cause the malf-
unction of the wireless remote control.
If the wireless remote control will not be used for a
●
long time, please take them out, and don't let the
leakage liquid damage the wireless remote control.
The operation should be in its receiving range.
●
●
It should be placed where is 1m away from the TV
set or stereo sound sets.
● If the remote control cannot operate normally, please
take the batteries out, and then reinsert it 30s later; if
it is also abnormal ,please replace the batteries.
● If the main unit needs to be remote controlled, please
aim remote controller at the receiver of main unit in order
to improve the receiving sensitivity of the main unit.
●
When the remote controller sends out signal, a mark
will flicker for about 1s. The bell will ring if the main unit
receives effective signal.

Changing batteries and notices

along the arrowhead
17
Fig.1
Fig.2