mundoclima MUCO-H6T Owners And Installation Manual page 12

Names and Functions of Each Part
Speed
Function
AMB.
AMB. Buttons (Continued)
Under the modes of living room,
●
restaurant, conference/office,The
setting temperature, speed, blowing
up and down as well as left and right
can be adjustable. If users change
the setting temperature, speed,
blowing up and down as well as
left and right, the operation will run
in accordance with the status of setting
adjustment. The services setting of
blowing up and down as well as left
and right of next time start-up will be
remained before last shutdown while
the setting temperature and speed
will run with the default.
Under the energy-saving mode, while
●
the heating service is on running, the
setting temperature, speed, blowing
up and down as well as left and
right can be adjustable. If users
change the setting speed, blowing
up and down as well as left and right,
it will run according the status of users'
●
setting adjustment. But the setting
temperature under the energy-saving
cooling function can not be adjusted.
Function Buttons of Air Conditioner
E-HEATER
AMB.
AMB.
AMB.Buttons (Continued)
The modes of living room, restaurant,
●
conference/office can only be called
out by pressing buttons of air con-
ditioner panel. If receiving the sig-
nal from remote control when the
air conditioner is running the modes
of living room, restaurant, confere-
nce/office, it will exit from the abo-
vementioned modes and run acc-
ording to the modes of remote control.
Function
Function Button
Under the status of switch-on, Every
●
time press the function button, the
settings of up and down, left and right,
drying, concurrent heating, timing, air
renewal, setting and room temperature
can be shifted in sequence. When a
certain character is flashing, it in-
dicates can proceed its setting and
go on setting by press buttons.
The action will be confirmed if
without receiving other operating
order in 5 seconds. Or press the
function button to leave for the confirm.
Press the function button under the
●
status of running drying service
can directly proceed shutdown.
Press the function button under
the status of shutdown and non-
drying can proceed timing setting.
10
ON/OFF
Mode