Marking And Setting Text Fields - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Operation METPOINT® BDL portable

12.3.2.3.1.1 Marking and setting text fields

Main menu  Settings  Sensor settings  C1
The alarm (see Chapter
measuring data), the resolution
Chapter 12.2.2.2 Denoting the measuring data and determining the resolution of the decimal
as the advanced settings
Sensor settings.
Main menu  Settings  Sensor settings  C1  Text field name
34
12.2.2.4 Alarm settings)
of the decimal places and the
(see Chapter 12.2.2.5 Advanced settings)
If the data logger is activated, the following
window appears. By pressing
logger can be deactivated.
(Only activated when settings and recordings were already
implemented)
Note:
When sensor settings are implemented or
changed, the data logger must be on STOP.
By pressing on fields with a white background,
changes or entries can be made.
and recording buttons
short name
are all described in Chapter
It is possible to enter a name with up to 24
characters.
yes, the data
(see Chapter 12.2.2.3 Recording
or the value name
places), as well
®
METPOINT BDL portable
(see
12.2.2