Remove screws (4x)
Figure 6.19 Nest Frame Removal
Mid-Frame Replacement
Required Parts
• P20501 Mid-Frame, SII
• P07885 Thermal Pad, 1.00 x 1.00 x 0.100" (4 Required)
• P07886 Thermal Pad, .035 x .035 x 0.100: (14 Required)
Mid-Frame Replacement
1 Follow all the above procedures to remove all PCB assemblies and hardware fastened to the original
Mid-Frame.
2 Install new thermal pads on the new Mid-Frame, do so per
3 Reverse the procedures used in step 1 to install all PCB assemblies and hardware to the new Mid-Frame.
Figure 6.20 Thermal Pad placement
Figure 6.20
Chapter 6: Replacement Procedures
53