Sony PCM-7040 Operation Manual page 77

8-2 Systems with Editing Capability and Their Applications
Connecting the BVE-800 video editor
You can connect this unit to a BVE-800 video editor.
Settings of this unit
1
Set the REMOTE (9P)/LOCAL selector to
REMOTE (9P).
2
Set the SYNC signal selector to VIDEO.
3
Set the setup menu "rEF tcF" item as follows.
NTSC system
• For SMPTE time code drop frame: "29 97 dF"
• For SMPTE time code non drop frame: "29 97
ndF"
PAL/SECAM system
"25 Ebu"
4
Set the setup menu "SYnc Pb" item to "EnAbLE".
5
Press the SYNC REC key so that the indicator
lights up (ON).
6
Set the setup menu "rc rtn" item to "oFF".
Setting of BVE-800
1
Set the TC/CTL selector on the front panel to TC.
2
Set the SYNCHRONIZE selector on the front
panel to ON1 or ON2. To use the PCM-7040 as a
recorder, set the SYNCHRONIZE selector to ON1.
3
When using the PCM-7040 as a recorder, set the
PREROLL TIME selector to 10.
4
To set SW2 of the BK-807 to frame-3, set the DIP
switch as follows.
SW2-1: ON
SW2-2: OFF
SW2-3: ON
SW2-4: ON
5
To set SW3 of the BK-807 to frame-9, set the DIP
switch as follows.
SW3-1: OFF
SW3-2: ON
SW3-3: ON
SW3-4: OFF
8-4
Chapter 8 Application Systems
Notes
• The first edit function can be used only when the
setup menu "1St Edit" item is set to "on" and a blank
tape is used.
• The memory jog function is not available.
• When using the PCM-7040 as a recorder, press the
AUDIO CH-1 key and AUDIO CH-2 key together.