Sony PCM-7040 Operation Manual page 23

3-2 Configuration Examples
Connection for digital audio signals
Connect as follows when you want to make digital
copies (to input digital audio signal and copy the
signal).
Example 1: When the recorder is a controlled device
Switch Setting
SYNC signal selector (front panel): INT
INPUT MONITOR key (front panel):
Turned off
Switch Settings
Audio input selector (front panel):
DIGITAL
SYNC signal selector (front panel):
EXT
INPUT MONITOR key (front panel):
Turned off
Setup menu setting
rEc tc (REC TIME CODE): inPut
din Sync (DIN SYNC): on or oFF
3-4
Chapter 3 Preparations
Player
DIGITAL OUTPUT
TIME CODE OUTPUT
1)
Digital audio signal
3)
Time code
TIME CODE INPUT
DIGITAL INPUT
Recorder
1) This signal is also used as the external sync signal
(D-I sync signal).
2) When you set "din Sync" (DIN SYNC) to oFF in
the setup menu, this signal is required as the
external sync signal. If the setting is set to on, then
the connection is not necessary.
3) When you want to make time code copies, make
the above connections and set this setup menu.
WORD SYNC OUTPUT
Word sync signal 2)
WORD SYNC INPUT