Sony PCM-7040 Operation Manual page 48

Digital audio recorder
Hide thumbs Also See for PCM-7040:
Table of Contents

Advertisement

1
Press the DISPLAY key to set the display to
"P– – L– –".
* * *
* * *
2
While holding down the DATA key, turn the
search dial to set the Program number locate point.
To increase the Program number: Turn the
search dial clockwise. If you exceed 799, the
"End" indication appears.
To decrease the Program number: Turn the
search dial counterclockwise. If you exceed
"bLA", the "End" indication appears.
To reset the Program number to "01": Press
the RESET key while holding down the
DATA key.
You do not need to press the SET key.
3
Press the LOCATE key.
The unit performs the Program number locate
function.
If you perform the Program number locate function
in memory start mode (with the MEMORY
START indicator blinking), the unit stores the
sound around the locate point to sound memory
and enters memory start standby mode.
Notes
• You can select either time code locate or Program
number locate.
When the unit shows the Program number on
the display: The unit performs Program
number locate.
When the unit shows the IN or OUT point: The
unit performs time code repeat playback.
When the unit displays any other number: The
unit performs time code locate.
• The unit cannot locate properly on a tape on which
Program numbers are not recorded in order. In this
case, renumber the Program numbers from the
beginning of the tape.
Program number (01 to
799), End ID or blank part
Current Program number
Searching for an unrecorded part (blank)
3
1
Press the DISPLAY key to set the display to
"P– – L– –".
* * *
* * *
2
While holding down the DATA key, turn the
search dial to set the blank search.
When the search dial is turned clockwise,
"bLA" appears after "End".
When the search dial is turned
counterclockwise, "bLA" appears after 01.
You do not need to press the SET key.
3
Press the LOCATE key.
The unit starts searching and stops about 2 seconds
ahead of the blank part.
Note
The unit cannot search for blanks of less than 1 minute
duration.
1
2
Program number (01 to
799), End ID or blank part
Current Program number
5-5
Chapter 5 Playback

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000150001

Table of Contents