Sony PCM-7040 Operation Manual page 12

INSERT AUDIO key and indicator
When this key is pressed, the indicator lights and the
unit goes into INSERT AUDIO mode. In INSERT
AUDIO mode, you can record only the audio signals
(for insertion) on a tape.
INSERT SUB (subcode) key and indicator
When this key is pressed, the indicator lights and the
unit goes into INSERT SUB mode. In INSERT SUB
mode, you can record only the subcode data (for
insertion) on a tape.
#º INPUT MONITOR key and indicator
Use this key to switch the audio output signal selection
between the playback signal and the input signal
#¡ CUE mode key and indicator
Pressing this key causes the indicator to light and the
search dial go into CUE mode. Turning the search dial
in CUE mode causes the tape speed to vary, according
to the angle and direction of search dial rotation. The
tape speed varies in 7 stages ranging from 1/5 the
normal speed to 16 times the normal speed in either
direction. Since you can listen to the playback sound
while adjusting the tape speed, you can locate (cue) the
tape to a desired position efficiently.
#™ Dial menu keys
Use these four keys (MENU, DATA, SET, and
RESET keys) together with the search dial to set
various modes or to change the information to be
displayed.
See chapter 7 "Menu Operations".
2-5
Chapter 2 Location and Function of Parts and Controls