Sony PCM-7040 Operation Manual page 70

The display that
appears and the
Data
meaning of the
display
37 out-10 (37 PIN
RESERVED
STATUS(10pin))
nonE*
SP Error : MUTE
intP
Err-intP
dAd cond : BAD CONDITION
bot
Eot
no tAPE : no tape
StArt
rEAdy : memory start ready
37 out-14 (37 PIN
ALARM
STATUS(14pin))
ALA*
SP Error
rEAdy
37 out-18 (37 PIN
SERVO
STATUS(18pin))
SEr*
SP Error
rEAdy
37 in-33 (37 PIN
CHASE
COMMAND(33pin))
cHASE*
rE-cHASE : changes the re-chase mode.
StArt
rEH
Pt SEt : MARK key
LocAtE : LOCATE key
Sync rEc : SYNC REC key
37 in-34 (37 PIN
EJECT
COMMAND(34pin))
EJEct*
rE-cHASE
Sync rEc
Functions
Selects the status signal
mode of 37-pin parallel
remote outputting from 10-
pin Reserved connector.
: no
: INTP (interpolation)
: MUTE or INTP
: beginning of tape
: end of tape
: MEMORY START indicator
Selects the status signal
mode of 37-pin parallel
remote outputting from 14-
pin ALARM connector.
: ALARM
: : same as 37 out-10.
Selects the status signal
mode of 37-pin parallel
remote outputting from 18-
pin SERVO connector.
: SERVO
: : same as 37 out-10.
Selects the command signal
mode of 37-pin parallel
remote inputting from 33-pin
CHASE connector.
: CHASE
O N - 1 n O N - 2 n O F F n
: MEMORY START key
: memory rehearsal
Selects the command signal
mode of 37-pin parallel
remote inputting from 34-pin
EJECT connector.
: EJECT
: : same as 37 in-33.
The display that
appears and the
Data
meaning of the
display
37 in-35 (37 PIN
RESERVED
COMMAND(35pin))
nonE*
rE-cHASE
Sync rEc
37 joG (37 PIN
MEMORY JOG)
di S AbLE*
EnAbLE
inPut-S (INPUT
MONITOR KEY)
EnAbLE*
diSAbLE
Auto
PAnEL-S (FRONT
PANEL KEY)
diSAbLE
Auto
"AFtr cuE (AFTER CUE
MODE)
StoP*
"rEc dFLt (POWER ON
REC MODE)
SAFE
ASS
Audio
Chapter 7 Menu Operations
Functions
Selects the command signal
mode of 37-pin parallel
remote inputting from 35-pin
Reserved connector.
: no
: same as 37 in-33.
:
Selects the CUE command
when the memory start
function is ready (15, 16, 17-
pin).
: CUE command
: MEMORY JOG command
speed: 1n 0.2, 3n0.5, 16n1
Selects to accept the
command from the INPUT
MONITOR key when the
tape is played back.
: accepts the command
: does not accept the
command when playing
back under the control of
8-pin parallel signal remote
connector
Selects to accept the
command from the tape
transport control keys on the
front panel when the tape is
played back.
: accepts the command
: does not accept the
command
: does not accept the
command when playing
back under the control of
8-pin parallel signal remote
connector
Selects to shift the mode to
STOP mode or PLAY mode
after exiting the cue mode by
pressing the CUE key during
cue mode.
: STOP
: PLAY
Selects the recording mode
to be automatically set at
power-on.
: master safe mode
: subcode insert mode
(Continued)
7-11