Siemens 7SR224 Technical Manual page 176

OBJECT
Object Variation
Number Number
60 4
80 1
No Object (function code only)
No Object (function code only)
No Object (function code only)
No Object (function code only)
Note 1: A Default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1, 2,
or 3 scans. Default variations are configurable; however, default settings for the configuration parameters are
indicated in the table above.
Note 2: For static (non-change-event) objects, qualifiers 17 or 28 are only responded when a request is sent with
qualifiers 17 or 28, respectively. Otherwise, static object requests sent with qualifiers 00, 01, 06, 07, or 08, will be
responded with qualifiers 00 or 01. (For change-event objects, qualifiers 17 or 28 are always responded.)
Note 3: Writes of Internal Indications are only supported for index 7 (Restart IIN1-7)
©2010 Siemens Protection Devices Limited
Function
Description Codes
20
unsol.)
21
22
class)
Class 3 Data 1
20
unsol.)
21
(dab. unsol.)
22
class)
Internal Indications 1
(read)
2
13
14
(warm restart)
23
24
(record current
7SR224 Argus Data Comms
REQUEST
(Library will parse) (Library will respond with)
Qualifier Function
Codes (hex) Codes (dec)
(dec)
06
(enbl. (no range, or all)
(dab. unsol.)
(assign
06
(read) (no range, or all)
07, 08
(limited qty)
06
(enbl. (no range, or all)
(assign
00, 01 129
(start-stop)
00
(write) (start-stop)
(see note 3) index = 7
(cold restart)
(delay meas.)
RESPONSE
Qualifier
Codes (hex)
00, 01
(response) (start-stop)
Chapter 4 Page 42 of 76