Edit - Panasonic AJ-HD1400E Operating Instructions Manual

Setup menus
(continued)

EDIT

No./Item Description of setting
1 For selecting whether to perform simultaneous
302*
playback during editing.
CONFI EDIT
0000 OFF :
Simultaneous playback is not performed.
0001 ON :
Simultaneous playback is performed.
1 For selecting how to connect the digital audio edit IN
303*
points.
AUD EDIT IN
0000 CUT :
Cut processing
0001 FADE :
V-fade processing
1 For selecting how to connect the digital audio edit
304*
OUT points.
AUD EDIT
0000 CUT :
OUT
Cut processing
0001 FADE :
V-fade processing
1 For selecting the VTR's mode upon completion of the
307*
cue-up operation.
AFTER CUE-
0000 STOP :
UP
The VTR is set to the STOP mode.
0001 STILL :
The VTR is set to the still picture (SHTL STILL)
mode.
0002 STILL2 :
The VTR is set to the still picture (VAR STILL)
mode.
1 For setting the allocation of the channels for the
320*
analog audio presets of a controller when a controller
EDIT
without a function to control the edit presets of the
RPLCE1
digital audio signals is used to edit the digital audio
signals of the VTR.
The VTR's CH1 edit presets are set to ON or OFF
following the analog audio signals specified by the
controller.
0000 N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
1 As with menu item No.320, the VTR's CH2 edit
321*
presets are set to ON or OFF following the analog
EDIT
audio signals specified by the controller.
RPLCE2
0000 N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
1 As with menu item No.320, the VTR's CH3 edit
322*
presets are set to ON or OFF following the analog
EDIT
audio signals specified by the controller.
RPLCE3
0000 N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
44
No./Item Description of setting
1 As with menu item No.320, the VTR's CH4 edit
323*
presets are set to ON or OFF following the analog
EDIT
audio signals specified by the controller.
RPLCE4
0000 N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
1 As with menu item No.320, the VTR's CUE edit
324*
presets are set to ON or OFF following the analog
EDIT
audio signals specified by the controller.
RPLCEC
0000 N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
"_____" indicates the factory setting.