Panasonic AJ-HD1400E Operating Instructions Manual page 38

Setup menus
(continued)
BASIC (continued)
No./Item Description of setting
006 For setting what the information to be superimposed.
0000 TIME :
DISPLAY
Only the data is displayed.
SEL
("Data" refers to the CTL, TC or UB value selected
by the COUNTER button.)
0001 T&STA :
The data and operation status are displayed.
0002 T&S&M :
The data, operation status and mode are
displayed.
0003 T&RT :
The data and REC TIME are displayed.
0004 T&YMD :
The data and REC DATE (year/month/day) are
displayed.
0005 T&MDY :
The data and REC DATE (month/day/year) are
displayed.
0006 T&DMY :
The data and REC DATE (day/month/year) are
displayed.
0007 T&UB :
The data and user bits are displayed. The time
code is displayed after the user bits when the
COUNTER button is set to UB.
0008 T&CTL :
The data and CTL are displayed. The time code is
displayed after the CTL data when the COUNTER
button is set to CTL.
0009 T&T :
The data and time code are displayed.
<Notes>
Depending on the format used, the following
displays appear for the modes.
<Format>
DVCPRO HD-LP >
DVCPRO HD
DVCPRO50
DVCPRO
DV
DVCAM
When T&S&M is selected as the item setting, an
error message is superimposed onto the display
when a warning or error occurs.
REC TIME and REC DATE are displayed only
during DV or DVCAM playback. The operation
mode is displayed with the DVCPRO HD-LP,
DVCPRO HD, DVCPRO50 or DVCPRO format.
007 For setting the horizontal position at which the
superimposed characters are to be displayed.
CHARA
0000 0
H-POS
: :
0006 6
: :
0037 37
<Note>
Press the joystick and tilt up/down and right/left to set
the character position.
008 For setting the vertical position at which the
superimposed characters are to be displayed.
CHARA
0000 0
V-POS
: :
0023 23
: :
0032 32
<Note>
Press the joystick and tilt up/down and right/left to set
the character position.
38
>
<Display>
DVCPRO_HD-LP
>
DVCPRO_HD
>
DVCPRO_50
>
DVCPRO
>
DV
>
DVCAM
No./Item Description of setting
009 For setting the superimposed display and menu
display type.
CHARA
0000 WHITE :
TYPE
White characters are displayed on a black
background.
0001 W/OUT :
White characters with black edges are displayed.
1 For setting the format in which to record or play back
020*
the signals including the HD REF signals.
SYS FORMAT
0000 1080i :
1080i mode
0001 720p :
720p mode
022 For setting the format in which to play back the tape.
0000 MANUAL :
PB FORMAT
The tape is played back in the format selected by
the menu item No.020 SYS FORMAT and No.023
FORMAT SEL setting.
0001 AUTO :
The tape is played back in the format selected by
the format in which the tape was recorded.
023 For selecting the format when "MANUAL" is selected
as the menu item No.022 PB FORMAT setting.
FORMAT SEL
0000 HD_LP :
The DVCPRO HD-LP format is selected, and the
format follows the menu item No.020 SYS
FORMAT setting.
0001 HD_SP :
The DVCPRO HD format is selected, and the
format follows the menu item No.020 SYS
FORMAT setting.
0002 422 :
The DVCPRO50 (422) format is selected.
0003 411 :
The DVCPRO (411) format is selected.
0004 DV :
The DV format is selected.
0005 DVCAM :
The DVCAM format is selected.
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
<Note>
When the signal format to be output is set to other than
DVCPRO HD and an external device is connected to the DV
connector, the following settings are recommended.
Menu No. 022 PB FORMAT:
MANUAL
Menu No. 023 FORMAT SEL:
Format of the tape that is inserted in the unit
"_____" indicates the factory setting.