Error Messages; Diag Menu; Displaying The Diag Menu; Displaying The "Hours Meter" Information - Panasonic AJ-HD1400E Operating Instructions Manual

Error messages

REC PB
CH1 CH2 CH1 CH2
CH1/5 CH2/6 CH3/7 CH4/8
PB
When a warning occurs in this unit, the error number is
indicated on the counter display.
Open the DIAG menu to display a description of the error on
the counter display or monitor TV.
When a operational malfunction has occurred in the unit, the
error number flashes on the counter display.

Displaying the "HOURS METER" information

When the joystick is moved up or down, the cursor (¢) moves, and a description of the item where the cursor is located is
shown on the counter display.
NO. Item
¢¢¢¢¢¢¢¢¢
Ser
H00 OPERATION
H01 DRUM RUN
H02 TAPE RUN
H03 THREADING
H04 F LOADING
H11 DRUM RUNr
H12 TAPE RUNr
H13 THREADINGr
H14 F LOADINGr
H30 POWER ON
<Notes>
The resettable items in the "HOURS METER" information are reset by the dealer when maintenance work is performed.
No operations can be performed using the SEARCH button or the joystick while the DIAG menu is displayed.
2 3
1
Displays the unit's serial No.
Displays the time that the power has been supplied in one-hour units.
Displays the time that the drum has been rotating in one-hour units.
Displays the duration for which the tape has been running in the FF, REW, PLAY, SEARCH (JOG,
SLOW, SHTL) and REC modes (but not in the JOG, SLOW and SHTL STILL modes) in 1-hour
increments.
The number of times for threading (loading)/ unthreading (unloading) is displayed in single units.
Displays the number of times front loading has been performed in single units.
Displays the time that the drum has been rotating in one-hour units. (Can be reset)
Displays the duration for which the tape has been running in the FF, REW, PLAY, SEARCH (JOG,
SLOW, SHTL) and REC modes (but not in the JOG, SLOW and SHTL STILL modes) in 1-hour
increments. (This item can be reset.)
The number of times for threading (loading)/ unthreading (unloading) is displayed in single units. (Can
be reset)
Displays the number of times front loading has been performed in single units. (Can be reset)
The number of times the power has been turned on is displayed in single units.

DIAG menu

This displays the VTR information.
The VTR information includes the warning information,
hours meter (usage time) information and UMID information.
The DIAG menu appears on the TV monitor when the
VIDEO OUT connector on the rear panel is connected to the
TV monitor.

Displaying the DIAG menu

1
Press the MENU button while holding down the PF
button.
The DIAG menu screen appears on the TV monitor, and
a message appears on the counter display.
2
Press the SEARCH button.
Each time this button is pressed, the display changes by
one step in the following sequence: "WARNING" >
"HOURS METER" > "UMID INFO" > "DIF STATUS1"
> "DIF STATUS2."
3
When the MENU button is pressed again, the original
display is restored.
Description
59