Panasonic AJ-HD1400E Operating Instructions Manual page 48

Setup menus
(continued)
VIDEO (continued)
No./Item Description of setting
1 For setting the axis of revolution for the chroma phase
651*
adjustment of the SD SDI output and analog
HUE STYLE
composite output.
DW
(SD)*
0000 Pb-Pr :
The axis rotates in a perfect circle on the SDI
(component style) vectorscope.
0001 U-V :
The axis rotates in a perfect circle on the analog
(composite style) vectorscope.
653 For adjusting the Y level of the HD SDI or HD analog
component output.
Y LVL
(– to 0 dB to +3 dB)
UP
(HD)*
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
654 For adjusting the PB level of the HD SD or HD analog
componentI output.
Pb LVL
(– to 0 dB to +3 dB)
UP
(HD)*
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
655 For adjusting the PB level of the HD SDI or HD
analog component output. (–
Pr LVL
0000 0.0%
UP
(HD)*
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
656 For adjusting the black level of the HD SDI or HD
analog component output.
BK LVL
50 –10.0%
UP
(HD)*
: :
150 0.0%
: :
250 +10.0%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
658 For adjusting the Y level of the SD SDI output and
Y LVL analog composite output. (–
0000 0.0%
DW
(SD)*
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
659 For adjusting the PB level of the SD SDI output and
Pb LVL analog composite output. (–
0000 0.0%
DW
(SD)*
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
"_____" indicates the factory setting.
48
No./Item
660
Pr LVL
(SD)*
661
BK LVL
(SD)*
662
V LEVEL
663
to 0 dB to +3 dB)
C LEVEL
664
HUE
(AJ-HD1400P)
C PHASE
(AJ-HD1400E)
to 0 dB to +3 dB)
to 0 dB to +3 dB)
*1 Displayed menus may vary depending on the settings in
*UP: With HD output (HD tape playback or up-converted
*DW: With SD output (SD tape playback or down-converted
Description of setting
For adjusting the PR level of the SD SDI output and
analog composite output. (–
0000 0.0%
DW
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
For adjusting the black level of the SD SDI output and
analog composite output.
50 –10.0%
DW
: :
150 0.0%
: :
250 +10.0%
<Note>
This setting takes effect when "CMPNT" has been
selected as the menu item No.650 setting.
For adjusting the video level of the HD SDI, analog
component output, SD SDI output and analog
composite output. (–
0000 0.0%
: :
1000 100.0%
: :
2000 200.0%
<Note>
This setting takes effect when "CMPST" has been
selected as the menu item No.650 setting.
For adjusting the chroma level of the HD SDI, analog
component output, SD SDI output and analog
composite output. (–
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPST" has been
selected as the menu item No.650 setting.
For adjusting the chroma phase of the HD SDI,
analog component output, SD SDI output and analog
composite output. (Approx. –30 o to +30 o)
0000 –31.0
: :
0062 0.0
: :
0124 31.0
<Notes>
This setting takes effect when "CMPST" has been
selected as the menu item No.650 setting.
If 50 Hz mode or 25 Hz mode has been selected as
the system menu item No.25 SYSTEM FREQ
setting:
• The HD SDI output cannot be adjusted.
• The SD SDI output and VIDEO output can be
adjusted only when an SD format tape is being
played back or when cross-convert has been
selected in
1080i>HD_OUT and No.631 720p>HD_OUT.
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
output)
output)
to 0 dB to +3 dB)
to 0 dB to +3 dB)
to 0 dB to +3 dB)
the menu item No.630