Panasonic AJ-HD1400E Operating Instructions Manual page 42

Setup menus
(continued)
OPERATION (continued)
No./Item Description of setting
1 For setting whether the recording/stop is executed
155*
automatically in conjunction with the Recording Mark
AUTO REC
of the HD SDI input signals from our camera recorder
or not.
0000 OFF :
Do not to execute the recording/stop automatically.
0001 TYPE1 :
To execute the recording/stop automatically in
conjunction with the Recording Mark in the LTC
information added to the HD SDI.
0002 TYPE2 :
To execute the recording/stop automatically in
conjunction with the Recording Mark in the SVITC
information added to the HD SDI.
<Notes>
Set the LOCAL/REMOTE switch to the REMOTE
position.
For the selection of TYPE 1 or TYPE 2, refer to
"Our camera recorder, Recording format, and
Recording Mark."
To select TYPE 1 or TYPE 2 to start recording
automatically, set this unit to the REC PAUSE
mode. It may not operate in any mode other than
the REC PAUSE mode. After accepting the auto
stop, this unit changes to the REC PAUSE mode.
When this unit is recording in normal operation, the
AUTO REC function is not available.
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
Our camera recorder, Recording format, and Recording Mark
Model Recording format
AJ-HDC27F, H 720/¢¢p over 60p
AJ-HDX400 1080/59.94i
1080/50i
AJ-HDX400E
1080/25p over 50i
720/59.94p
720/23.98p over 59.94p
720/29.97p over 59.94p
1080/59.94i
1080/23.98p over 59.94i
AJ-HDX900
1080/29.97p over 59.94i
1080/50i
1080/25p over 50i
720/50p
720/25p over 50p
*2 In the initial settings, the Recording Mark is not
overlapped on the HD SDI signals.
42
Recording
Remarks
Mark TYPE
TYPE1
ー
2
–*
2
–*
It is possible to
switch between
2
–*
TYPE 1 and
TYPE 2. TYPE-1
TYPE1
and TYPE-2 are
the initial
TYPE1
settings for the
camera recorder.
TYPE1
If the unit is used
2
with the TYPE-1
–*
settings, set the
TYPE2
UB MODE of the
camera to "FRM
2
–*
RATE". If it is
used with the
2
–*
TYPE-2 settings,
set the VITC UB
2
–*
MODE to "FRM
RATE."
TYPE1
TYPE1
No./Item Description of setting
160 For setting the repeat playback mode.
0000 OFF :
MEMORY
No repeat playback (normal operation).
MODE
0001 M-STOP :
The tape stops near the BEGIN point when it is fast
forwarded or rewound.
0002 REPT1 :
When the tape reaches the END point, it is
rewound to the BEGIN point, and stops.
0003 CONT :
When the tape reaches the END point, it is
rewound to the BEGIN point, and plays back, and
this is done repeatedly.
161 For setting the BEGIN point in the repeat playback
mode.
CTL BGN
Either TC or CTL is set as the counter display mode
or
using the COUNTER button.
TC BGN
If no mode is set, – – : – – : – – : – – appears, and the
tape start serves as the BEGIN point.
162 For setting the END point in the repeat playback mode.
Either TC or CTL is set as the counter display mode
END
using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the
tape end serves as the END point.
163 For setting what images are to be output while the
tape returns to the BEGIN point in the repeat
REPT MODE
playback mode.
0000 FREEZE :
The tape returns to the BEGIN point with the image
played back at the END point still frozen.
0001 BLACK :
The tape returns to the BEGIN point while the
screen remains black.
0002 MENU :
The tape returns to the BEGIN point following the
the settings in menu No. 140 OUTPUT.
<Note>
If the tape end is set as the END point when
"FREEZE" is selected, the playback image will not be
frozen properly.
Set the END point to a place within the range where
images are recorded.
180 For setting the type of battery.
0000 NiCd12 :
BATTERY
Settings for 1 pc. 12 V battery (NEAR: 11.2 V,
SEL
END: 10.6 V)
0001 NiCd13 :
Settings for 1 pc. 13 V battery (NEAR: 12.0 V,
END: 10.6 V)
0002 NiCd14 :
Settings for 1 pc. 14 V battery (NEAR: 13.6 V,
END: 10.6 V)
0003 S-LION :
Settings for 1 pc. lithium-ion battery "BP-L90A".
(NEAR: 11.7 V, END: 10.6 V)
0004 I-LION :
Settings for 1 pc. lithium-ion battery "ENDURA80".
(NEAR: 12.9 V, END: 12.4 V)
0005 TYPE-A :
Setting for using the battery selected by the menu
item No.181 TYPE-A NEAR item and No.182
TYPE-A END item
0006 TYPE-B :
Setting for using the battery selected by the menu
item No.183 TYPE-B NEAR item and No.184
TYPE-B END item
"_____" indicates the factory setting.