Operation - Panasonic AJ-HD1400E Operating Instructions Manual

Setup menus
(continued)

OPERATION

No./Item Description of setting
100 To set the transition method to search mode (stick
operation).
SEARCH
0000 STICK :
ENA
Shift to the search mode when the SEARCH button
is pressed or when the stick is operated.
0001 KEY :
Do not shift to the search mode unless the
SEARCH button is pressed.
101 For setting the maximum speed in the shuttle mode.
0000 X8.4 :
SHTL MAX
8.4k normal speed
0001 X16 :
16k normal speed
0002 X32 :
32k normal speed
<Note>
The maximum speed for the HD SP mode is
automatically limited to 25k normal speed.
102 For setting the maximum speed of fast forward or
rewind operations.
FF.REW MAX
0000 X16 :
16k normal speed
0001 X32 :
32k normal speed
0002 X50 :
50k normal speed
<Notes>
The maximum speed for the HD SP mode is
automatically limited to 25k normal speed.
The maximum speed for the DV and DVCAM
modes is automatically limited to 32k normal
speed.
104 For setting whether a warning is to be displayed when
the REF VIDEO signal is not connected.
REF ALARM
0000 OFF :
No warning is displayed.
0001 ON :
A warning is displayed by the flashing STOP lamp.
1 For setting the mode of the VTR, which becomes the
105*
EE state when menu item No. 140 OUTPUT is set to
AUTO EE
"EE."
SEL
0000 S/F/R :
The mode changes to the EE state when this item
is set to STOP, FF, or REW.
0001 STOP :
The mode changes to the EE state only when this
is set to STOP.
106 For setting the output conditions of video images and
voice when ejecting the tape.
EJECT EE
0000 EE :
SEL
Both the video and audio signals are always output
in the EE (electric modulation to electric playback)
mode regardless of the setting of the menu No.140
OUTPUT.
0001 BLACK :
The output status differs according to the setting of
the menu No.140 OUTPUT.
EE: The signals are output in the EE mode.
TAPE: BLACK is output for the video, and the
audio is muted.
0002 GRAY :
The output status differs according to the setting of
the menu No.140 OUTPUT.
EE: The signals are output in the EE mode.
TAPE: GRAY is output for the video, and the audio
is muted.
<Note>
When "23/24" mode, "25 (HD/SD)" mode, or "50 (HD/
SD)" mode is selected in menu No. 25 SYSTEM
FREQ, BLACK is output if "EE" is selected.
40
No./Item Description of setting
1 For setting the HD SDI and HD analog component
107*
output signals in EE mode when HD SDI input is
EE MODE
selected.
SEL
0000 NORMAL :
Signals delayed by the time taken by internal signal
processing are output.
0001 THRU :
Signal processing is not undertaken internally, and
the signals are output without delay at their original
timing.
<Notes>
The superimposed information is not displayed
when THRU is used as the setting.
When 1394 or SG is selected for the input signal in
edit mode, internal signal is selected forcibly
"NORMAL".
108 For setting the play rise time in frame increments.
0000 0
PLAY DELAY
: :
0015 15
1 For selecting in how many field increments the
109*
playback framing is to be locked.
CAP. LOCK
0000 2F
0001 4F
0002 8F
<Notes>
"8F" can be selected only when "50i/25p" is
selected as the menu item No.25 SYSTEM FREQ
setting.
In the HD LP or HD SP mode, 2F mode is selected
when recording and playing back, including editing,
regardless of the menu.
110 For setting whether the tape is to be automatically
rewound to its beginning when the tape end is detected.
AUTO REW
0000 OFF :
The tape is not rewound.
0001 ON :
The tape is rewound to its beginning.
112 For setting the video output when the mode is
transferred from playback images to standby OFF
FRZ MODE
(half loading) mode or EJECT mode.
SEL
0000 DIS :
The video output is muted.
0001 STBOFF :
When the standby OFF (half loading) mode is
established, the image played back at that moment
is frozen and output.
0002 SOF&EJ :
When in the STANDBY OFF mode and the EJECT
mode, the image played back at that moment is
frozen and output.
<Notes>
The frozen status will be according to the settings
in menu No. 604 FREEZE SEL.
In the EJECT mode, the frozen image will be
output only when setup No. 106 EJECT EE is the 1
(BLACK) or 2 (GRAY) setting.
114 For setting the operation of the REC INHIBIT lamp when
the cassette is set to the erasure prevention status.
REC INH
0000 LIGHT :
LAMP
The lamp lights.
0001 FLASH :
The lamp flashes.
<Note>
When the REC INHIBIT switch on the front panel is set
to ON, the REC INHIBIT lamp lights at all times
regardless of what setting is selected for this menu item.
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
"_____" indicates the factory setting.