Synchro Edit Function - Panasonic AG-7330 Operating Instructions Manual

Synchro Edit Function
Connecting the AG-7330 by synchro cable to a video camera (AG-450) or VTR (AG-7450 with AG-S745) equipped with a Synchro
Edit Function makes it possible to synchronize the editing start and stop of both units.
The playback start and stop of the video camera will be synchronized with the recording start and stop of this VTR.
To Remote
Control
Connector
To S-Video Output
Connector
S-Video (4P)
Video Camera
Adaptor Cable
(AG-450)
Connecting to AG-450, video camera
Preparation
¢Set the Framing Selector to "OFF" and the Auto Back Space
Selector to "ON" by ON-SCREEN mode.
Make the necessary connections as shown in the connection
diagram.
Set the Edit Switch of AG-450 to "ON" and the Image
Selector of this VTR to "EDIT".
1. Put the VTR in the recording pause mode.
2. Put the video camera in the still playback mode at the point
where you want to start editing.
Press the Pause/Still Button on the VTR. The video camera
changes over to the playback mode and the dubbing will
start automatically.
3.
no —
Synchro Connection Cable (VW-K1E)
AC-Adaptor
(VW-AM7)
TV Monitor
Connecting to AG-7450
AG-7450 with AG-S745
Optional
cable
S-VIDEO
IN
Connector
S-VIDEO
OUT
Connector
AG-7330
. Set the SYNCHRO EDIT Switch of AG-S745 to "ON".
. Press the PLAY and PAUSE Buttons of AG-7450.
. Press the REC, PLAY and PAUSE/STILL Buttons on the
VTR.
. Press the Pause/Still Button on the VTR. The video camera
changes over to the playback mode and the dubbing will
start automatically.
. When the PAUSE/STILL Button on the VTR is pressed
again, the VTR will go into REC PAUSE and AG-7450 will
go into still mode.
When editing is completed, press the STOP Button of
AG-7330 first and then the video camera's or AG-
7450's.