Panasonic AJ-HD1400E Operating Instructions Manual page 49

Setup menus
(continued)
VIDEO (continued)
No./Item Description of setting
665 For adjusting the setup ( or black) level of the HD SDI,
analog component output, SD SDI output and analog
SETUP LVL
composite output. (–10 o to +10 o)
(AJ-HD1400P)
50 –10%
: :
BK LVL
150 0.0%
(AJ-HD1400E)
: :
250 +10.0%
<Note>
This setting takes effect when "CMPST" has been
selected as the menu item No.650 setting.
1 For setting whether to clip what is below the pedestal
676*
level for the Y (luminance) signal of composite output
BLK CLIP
and SD SDI output.
0000 OFF :
What is below the pedestal level is not clipped.
0001 ON :
What is below the pedestal level is clipped.
1 For selecting ON or OFF for the closed caption signal
680*
in the first field.
CC (F1)
0000 BLANK :
DW
BLANK*
Forced blanking
0001 THRU :
No blanking
1 For selecting ON or OFF for the closed caption signal
681*
in the second field.
CC (F2)
0000 BLANK :
DW
BLANK*
Forced blanking
0001 THRU :
No blanking
1 This selects the composite output signal in HD mode.
682*
0000 THRU :
VO SETUP
The signal is output with no setup added.
UP
(HD)*
0001 ADD22L :
(AJ-HD1400P)
The signal is output from line 22 with a 7.5% setup
added.
0002 ADD21L :
The signal is output from line 21 with a 7.5% setup
added.
0003 ADD20L :
The signal is output from line 20 with a 7.5% setup
added.
1 This selects the composite output signal in SD mode.
683*
0000 THRU :
VO SETUP
The signal is output with no setup added.
DW
(SD)*
0001 ADD22L :
(AJ-HD1400P)
The signal is output from line 22 with a 7.5% setup
added.
0002 ADD21L :
The signal is output from line 21 with a 7.5% setup
added.
00023 ADD20L :
The signal is output from line 20 with a 7.5% setup
added.
1 For setting whether to superimpose EDH onto the SD
684*
SDI output.
DW
EDH (SD)*
0000 OFF :
EDH is not superimposed.
0001 ON :
EDH is superimposed.
1 For selecting the mode of the edge subcarrier
685*
reduction (ESR) operation in the playback circuit.
ESR MODE
0000 OFF :
DW
(SD)*
ESR is forcibly turned off.
0001 AUTO :
ESR is automatically set to ON or OFF depending
on the unitÅfs operation.
No./Item Description of setting
1 For selecting the cross color processing during
686*
playback.
CCR MODE
0000 OFF :
DW
(SD)*
The cross color is output as is.
0001 ON :
The cross color can be reduced.
1 For selecting whether to superimpose the VIDEO
687*
INDEX signal on the SD SDI output signal.
SDI INDEX
0000 OFF :
DW
0*
The VIDEO INDEX signal is not superimposed on
the SD SDI output signal.
0001 ON :
The VIDEO INDEX signal is superimposed on the
SD SDI output signal.
1 This is used to select the method to process the
689*
image compression during recording.
COMP MODE
0000 NORMAL :
The images are recorded using the regular
compression processing.
0001 DARK :
The images are recorded while minimizing the
compressed image distortion which arises in the
dark areas below about 10 IRE (70 mV).
<Notes>
This setting is valid when recording in the 720p
mode.
When "DARK" has been selected, the COMP lamp
lights.
1 This selects whether or not to record the UMID
690*
information on the tape.
UMID REC
0000 OFF :
UMID information is not recorded on the tape.
0001 ON :
The UMID set in menu No. 691 UMID GEN is
recorded. If no Basic UMID is available in the input
signals, a Basic UMID of the unit, which is newly
generated, is recorded.
<Note>
UMID information cannot be rewritten in this unit.
1 This selects a UMID that is recorded when menu No.
691*
690 UMID REC is turned "ON".
UMID GEN
0000 INT :
Newly created basic UMID information of this unit
is always recorded.
0001 EXT :
The UMID information of the input signals is
recorded. If no UMID is available in the input
signals, a Basic UMID of the unit, which is newly
generated, is recorded.
<Note>
The source pack (of the UMID information) of the
input signal will be recorded on the tape, regardless
of this menu's setting.
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
*UP: With HD output (HD tape playback or up-converted
output)
*DW: With SD output (SD tape playback or down-converted
output)
"_____" indicates the factory setting.
49