Tape Operation (Search System) - Panasonic Omnivison VCRplus+ PV-V4611 Operating Instructions Manual

Tape Operation
Search System
For each recording, an invisible index mark is placed
on the tape. A program index and information are also
included for timer recordings. These marks are used to
access or scan recordings.
Index Search
1
INDEX I PROGRAM END
ENTER INDEX NUMBER :1
USING 1-9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH REW
NEXT : SEARCH
EXIT :STOP_
Press SEARCH*
to display SEARCH
in Stop or Play
mode.
Program End Search
Locates end point of recording for
continuity.
1
Press SEARCH twice
to display SEARCH in Stop or
Play mode.
2
INDEX SEARCH 3
Press number keys
SEARCH
INDEX | PROGRAM END
to select recording
number.
• To calculate
SEARCH START: FF
number, see below.
EXIT :SEARCH
Press FF
to start
PROGRAM
END SEARCH.
Press FF or REW
to start search.
• Play begins at
search end. To
search forward or
back 1 index,
press FF or REW
while screen left
is displayed (10
sec.).
H To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
|_I
<
>
rr
i i_j
1 1
1
2 |
Li 1 4
I
LlJ
6
tn
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: 4 indicates start points of each recording.
INDEX SEARCH
• If Index Search is started very close to
an index mark, that index mark may not
be counted in the search.
Examples of Program End Search.
Fig. 1
If f Program 1
ifill Program 2 or BLANK ||
j
the current tape portion
Pres* SEARCH button
* FF
Fig. 2
1 ^ EndPoint
|3|| Program 1 (] • BLANK
jj §| Program 2 H BLANK |
current tap® portion f i'.
Prm—
SEARCH button [ V
tf- End Point
Fig. 3
Pre** SEARi
tap® portion
RCH button
me
Program 1
J
End Point
fl
If search exceeds
a few seconds in
BLANKaroa.
Upon locating end point,
->search continues 7 sec. past end point,
->tape rewinds to 10 sec. before end point,
-->tape plays to end point and stops.
* If Program End Search is started very
close to an index mark, that mark may be
skipped over.
•To cancel, press PLAY or STOP.
24
For assistance, please call : 1-800-211-PAN A(7262) or send e-mail to : consumerproducts@panasonic.com