Tape Operation Cia Ib Lidia 24; Commercial Advance - Panasonic Omnivision PV-V4640 Operating Instructions Manual

_ Tape Operation
COMMERCIAL >» ADVANCE?
COMMERCIAL »» ADVANCE'? detects and marks the beginning and end points
of commercials on your tape for recordings over 15 minutes in length.
When COMMERCIAL» ADVANCE' marked tape is played back, the VCR
automatically advances through the commercial segments at high speed.
You can also set this feature to Manual so as to have more control over
the advance process. The effectiveness of this system can vary due to
differences in the way television stations broadcast. See page 26 for
answers to the most commonly asked questions about this feature.
COMMERCIAL» ADVANCE" Marking
When C/A RECORD: ON, VCR automatically rewinds the tape after a
recording has been made and marks the beginning and end of any
detected commercial blocks. After marking is done, the tape is returned
[Z check list before you begin.
O All connections are made.
LI One time Setup completed.
O VCR is plugged in.
C] TV is turned on and set to CH3, 4 or Video
on TV.
to the end of recording. Commercials are not erased from the tape. a
0
A :PLAY 1 Display MENU. STOP
O Press ACTION.* > -FF
A ee O
MENU Display SET UP FEATURE. 1 ACTION
FEATURE 1) Press AY to select. -
SET UR ONNEL o oy id iii
VCR' S OUTPUT CH:3 NUMBERED
SELECT:4 Y KEY keys
SET ¡> KEY
END 'ACTION KEY
SET UP FEATURE Display SET UP
TIMER PROGRAMMING COMMERCIAL ADV.
1) Press AY to select.
2) Press > to display.
SELECT:A Y KEY
SET :> KEY
END ¡ACTION KEY
SET UP commerciaL abv, | . Set ON or OFF.
1) Press AY to select. cD
: ON
C/A PLAYBACK : AUTO ~
-| 2) Press > to set. + When using the timer to record two
adjacent shows on the same channel,
better accuracy can be obtained by
SELECT 2 Z PET programming each shows separately.
SET :> KEY
END ¡ACTION KEY
ON Timer, VCR Plus+ System, and One Touch recordings are marked automatically.
THE VCR 1S WAITING TO When STOP is pressed during normal recording, Select One of a) or b) or c).
MOCHA VOL RECORDED © a) Press 1 key to mark the recording now.
"NOW MARKING COMMERCIALS" appears.
b) Press 2 key to mark the recording later (after the power has been turned off).
- PUSH 1 KEY * If the tape is rewound and another recording started before the power is
: PUSH 2 KEY turned off, commercials may not be marked correctly.
; PUSH ACTION KEY) ©) Press ACTION to cancel the marking of this recording.
OFF The VCR will not mark commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature, off should be selected.
Return to normal screen.
Yo Press ACTION three times.
For assistance, call 1-800-211-PANA(7262).