Pacio Shield Connection Terminal Block - Parker PAC Installation Manual

PACIO Shield Connection Terminal Block

The PACIO Shield Connection Terminal Block consists of the shield clamp, the clamp holder, two
screws M3x5, two washers, and two spring washers.
Technical Data
Part number
Shield clamp 8mm
Technical Data
Part number
Shield clamp 14mm
Installation
Fasten the clamp holder by using the washers and spring washers on the housing of the PACIO Module.
Use the tapped holes on the front side. They are provided for it.
PACIO Shield Connection Terminal Block 2x8mm
PACIO-412-01
2 pieces
PACIO Shield Connection Terminal Block 14mm
PACIO-412-02
1 piece