User Button Area; Transition Area - Panasonic AV-HS410N Operating Instructions Manual

1. Parts and their functions

1-1-3. User button area

 User buttons (USER BUTTON) [U1 to U8]
These are used to assign some functions of the menu
settings to the [U1] to [U8] buttons on the Config menu.
 Refer to "3‑3‑1. Setting the user buttons" (<Operations
and Settings> Operating Instructions).

1-1-4. Transition area

 [BKGD] button
This executes the background transition when the [AUTO]
button () or fader lever () has been operated.
When the [BKGD] button is pressed and it is selected, its
indicator lights in amber.
If the [KEY] button () is now pressed, the indicator goes
off, and the de‑selected status is established.
When the [BKGD] button and [KEY] button () are
pressed at the same time, both buttons are set to the
selected status.
 [KEY] button
This executes the key transition when the [AUTO] button
() or fader lever () has been operated.
When the [KEY] button is pressed and it is selected, its
indicator lights in amber.
If the [BKGD] button () is now pressed, the indicator
goes off, and the de‑selected status is established.
When the [BKGD] button () and [KEY] button are
pressed at the same time, both buttons are set to the
selected status.
 MIX, WIPE selection status LEDs
These light up to indicate whether MIX or WIPE has been
selected when background transitions or key transitions
are executed.


N/R R
WIPE DIRECTION


BKGD KEY

MIX MIX
WIPE WIPE

MIX WIPE


CUT AUTO

21
U1 U2 U3



KEY FTB
ON ON

PinP1 PinP2
ON ON

DSK
ON
 [MIX] button
This is used to switch the A and B bus images while
making them overlap.
During the transition, the A and B bus output total is kept
at 100 %.
When the [MIX] button is pressed and it is selected, its
indicator lights in amber.
If the [WIPE] button () is now pressed, it goes off, and
the de‑selected status is established.
 [WIPE] button
This is used to execute the transition using the pattern
selected by the number key (9).
When the [WIPE] button is pressed and it is selected, its
indicator lights in amber.
If the [MIX] button () is now pressed, it goes off, and the
de‑selected status is established.

U4 U5 U6 U7 U8
USER BUTTON