Crosspoint Area - Panasonic AV-HS410N Operating Instructions Manual

1. Parts and their functions

1-1-1. Crosspoint area




4 PGM/A bus crosspoint buttons
[PGM/A 1 to 12]
These are used to select the PGM/A bus video signals.
Buttons 1 to 24 can be selected using the [SHIFT] button.
 Refer to "1‑1‑2. Selecting the bus using the SHIFT
function" (<Operations and Settings> Operating
Instructions).
"A/B", "PGM‑A/PST‑B" or "PGM‑B/PST‑A" can be selected
as the Bus Mode item by selecting the Config menu
following by the Operate sub menu.
 Refer to "1‑1‑3. Selecting the bus mode" (<Operations
and Settings> Operating Instructions).
When one of the crosspoint buttons (4, 5, 7) is held
down, the name of the input material and the number of
the crosspoint button are displayed.
5 PST/B bus crosspoint buttons
[PST/B 1 to 12]
These are used to select the PST/B bus video signals.
Buttons 1 to 24 can be selected using the [SHIFT] button.
 Refer to "1‑1‑2. Selecting the bus using the SHIFT
function" (<Operations and Settings> Operating
Instructions).
"A/B", "PGM‑A/PST‑B" or "PGM‑B/PST‑A" can be selected
as the Bus Mode item by selecting the Config menu
following by the Operate sub menu.
 Refer to "1‑1‑3. Selecting the bus mode" (<Operations
and Settings> Operating Instructions).
KEY PinP1 PinP2 DSK
AMBER : FILL / GREEN : SOURCE
AUX BUS DELEGATION
AUX
PGM
A
1/13 2/14 3/15 4/16
PST
B

AUX1 AUX2 AUX3 AUX4 DISP
5/17 6/18 7/19 8/20 9/21
6 AUX bus selector buttons
(AUX BUS DELEGATION)
Select the bus to be operated using the AUX bus
crosspoint buttons (7).
The selected button lights.
[KEY]:
This button is used to change the AUX bus crosspoint
buttons (7) into the source selector buttons for the key
fill buses or key source buses.
Each time it is pressed, the selector button function
is switched between the key fill buses and key source
buses.
Amber
Green
[PinP1], [PinP2]:
These buttons are used to change the AUX bus
crosspoint buttons (7) into the source selector buttons
for the PinP1 and PinP2 bus sources.
[DSK]:
This button is used to change the AUX bus crosspoint
buttons (7) into the source selector buttons for the DSK
fill buses or DSK source buses.
Each time it is pressed, the selector button function is
switched between the DSK fill buses and DSK source
buses.
Amber
Green
[AUX1] to [AUX4]:
These buttons are used to change the AUX bus
crosspoint buttons (7) into the selector buttons for the
sources of the AUX buses.
[DISP] (built-in display):
This button is used to change the AUX bus crosspoint
buttons (7) into the source selector buttons for the
DISP buses (for the images which are shown on the
built‑in display).
18

MV PVW PGM
AUX/DISP SOURCE
SHIFT
SHIFT
10/22 11/23 12/24
SHIFT
Key fill buses
Key source buses
DSK fill buses
DSK source buses