Disassembly Procedures - Epson Stylus C110 Service Manual

EPSON Stylus C110/C120/D120

4.2 Disassembly Procedures

For disassembling each unit, refer to the pages in the following flowchart.
Start
" 4.3.4 Upper Housing/Cover
Open Sensor " (p74)
" 4.5.1 Removing Printer
Mechanism (Lower Housing) " (p82)
" 4.4.2 Panel Unit " (p79)
" 4.4.1 Main Board Unit/Left
Frame " (p76)
" 4.5.5 Front Frame/Right Frame "
(p87)
" 4.5.11 CR Motor " (p93)
" 4.5.3 CR Scale " (p85)
" 4.5.4 Hopper " (p86)
" 4.5.12 Main Frame Assy. " (p95)
" 4.5.15 ASF Unit " (p99)
" 4.5.16 Ink System Unit " (p101)
" 4.5.6 Star Wheel Holder Assy. "
(p88)
" 4.5.7 EJ Roller " (p89)
DISASSEMBLY/ASSEMBLY
Downloaded from www.Manualslib.com
" 4.3.1 Paper Support Assy. " (p73)
" 4.4.1 Main Board Unit/Left
Frame " (p76)
" 4.4.3 Power Supply Unit " (p81)
" 4.5.6 Star Wheel Holder Assy. "
(p88)
" 4.5.7 EJ Roller " (p89)
" 4.5.13 CR Unit " (p97)
" 4.5.17 Front Paper Guide "
" 4.5.8 PF Encoder Sensor " (p90)
" 4.5.9 PF Scale " (p91)
Figure 4-1. Disassembling Flowchart
manuals search engine
" 4.3.2 Stacker Assy. " (p73)
" 4.4.2 Panel Unit " (p79)
" 4.5.4 Hopper " (p86)
" 4.5.8 PF Encoder Sensor " (p90)
" 4.5.9 PF Scale " (p91)
" 4.5.10 PF Motor " (p91)
" 4.5.14 Upper Paper Guide " (p99)
" 4.5.18 PF Roller " (p105)
" 4.5.19 Waste Ink Pads " (p106)
Some parts/units are shown both in the solid line box and the dashed line box. Find the part or
C H E C K
unit you want to remove from those indicated in solid line box (the way to the solid line box is the
P O I N T
shortest way). You need to remove the parts/units shown in dashed line box if they exist on the
way to the target part/unit.
Disassembly Procedures
" 4.3.3 Cover Printer " (p74)
" 4.5.2 Printhead " (p83)
Revision B
" 4.5.3 CR Scale " (p85)
72